PROTOTYPE
Class C11 N0.157 built in 1940 at kisyakaisya,Japan. |
| SCALE |
1": 1' (1/12 full scale) |
| GAUGE |
3-1/2" (89mm) |
| DRIVING WHEELS |
Diameter 127 mm (5") |
| CYLINDERS |
BORE 30mm (1-3/16")
STROKE 51mm (2")
DRAIN 6 cocks (hand) |
| PISTON VALVES |
BORE 18mm (23/32")
TRAVEL 15mm (19/32")
FULL GEAR CUT-OFF 78% |
| VALVE GEARS |
Walshart type |
BOILER
Material: A11 copper, silver soldered throughout
Twin Pop Type Safety Valves
Hydraulic Test Pressure: 12 kg/cm2 (170 Lbs/in2)
Water Capacity: Approx. 2.8 lit. (171cu.in.)
Grate area:40mm x 173mm(1-9/16" x 6-13/16")
Fuel: Coal or Liquefied Petroleum Gas
Regulator: Screw Type
Superheater: O6mm stainless steel tubes 3 pcs. |
| Water Supply System |
Axle driven double acting pumps: O8mm x 12mm stroke
(O5/16" x 15/32" stroke)
Hand pump: O12mm x 25mm stroke(O15/32" x 1" stroke) |
| LUBRICATORS |
Wakefield type
lubricator Oil capacity: 32 cc(1.95cu.in)
O3 mrn x 6.6 mm stroke (O1/8" x 1/4" stroke) |
| STEAM WHISTLE |
Single tone
3 Note Chime(Optional extra) |
| BRAKES |
Hand brake |
| TURBO GENERATOR |
Output 3V x 0.1A (Optional extra) |
| WATER TANKS |
Side tanks Water capacity 2lit.(122cu.in.)
Rear tank Water capacity 0.75lit(45.8x2cu.in)
(Optional extra) |
| WEIGHT(DRY) |
50kg (110 Lbs) |
| SIZE |
Length 1,050mm(41-15/16")
Width 232 rnm (9-1/8")
Height 327mm(12-7/8")
Wheel bases 341mm (13-13/32") |
